Discussion Locked

problems pinging

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I haveNT 4.0 and a backoffice server at the main site with t1's connecting into 8 satellite sites each with nt servers. When I am in the routers I can ping other routers but from any pc or server all the sudden I cannot ping other sites and everything is working fine on the network????
Where to start..??

7 replies

by chrisdent

Sounds like something is blocking ICMP traffic.

Access on other ports to the other networks functioning correctly?

There's also a packet sniffer called Ethereal (http://www.ethereal.com/) which can be great for finding out where things are and aren't being sent / recieved.

by mark

What kind of routers? Sounds like you have ICMP replies turned off. Are neither the PCs nor routers replying? Or are the routers replying and the PCs and Servers are not? Are you using NAT?

by rg11

I have cisco routers. When in the main router I can ping all satellite routers. When at the satellite routers I can only ping the main router. When at satellite servers I cannot ping anything out side that site. Cant even ping the main server. I can map a drive to the main server, pc anywhere in the main server, and access our database on the main server. Now from that main server when I ping the satellite servers or routers I get a reply from the router ip, destination net unreachable...

by chrisdent

I assume a star configuration, so all traffic from satellite sites passes through that main router?

Everything you have above suggests the main router is blocking ICMP traffic to everything but itself in both directions.

This especially holds true if all other network services are functioning correctly.

This discussion is closed to new replies.