Discussion Locked

Q: HOME NETWORKING

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I HAD 2 PCDESKTOP 1 IM USING WINNT4SERVER AND THE OTHER ONE IS WINME.
I WANT TO KNOW WHETHER IS IT POSSIBLE TO CONNECT THIS 2 PCS BY PARARELL CABLE OR UTP CABLE? (1PC NIC IS 3COM & OTHER ONE IS NS2 NIC)IS THIS CAN BE DONE WITHOUT NE USE OF HUB? ANDALSO MY PURPOSE IS TO SHARE FILES.

2.HOW TO CONNECT 2 PCS BY SHARING INTERNET? (BOTH PCS HAVE SEPERATE MODEM 56K)IS THERE ANY HARDWARE/SOFTWARE REQUIREMENTS?

THANKS

3 replies

by donnie_g

1. The following link will give you information on building and using a ethernet crosover cable. http://www.practicallynetworked.com
2. The easiest way to share your internet connection would be, after you get your network working with the crossover cable, to install a proxy server on your nt machine and configure your winme machine to use a proxy server.
I've never used nt server or winme, so i can't say to much about configuring them.
The general description is to make your crossover cable connect it to your 2 computers and configure both machine with a static ip address, install your networking protocols (you will need TCP/IP for the internet sharing). Once your computers are talking, you will need to get you a proxy server to install on nt server. You can go to download.com and search for these.One that i used for a while was called JANA it's freeware but it worked real well.(got rid of it because i needed a better email server). Once you install your proxy, go to your winme machine and configure your browser to use a proxy server instead of a dialup and put in the IP address of your NT machine.
If you need more info just email me and i'll try to help all i can.

by gandalfen

1. What you need to connect to NIC's without a hub, is to use a crossed cable (these are usually red standard net cables). You can also use a parallel cable though.
Remember to set the network up:
pc1: 100.100.100.1
pc2: 100.100.100.2
Install file and printer sharing on both machines (network setup). Activate the guest account, or use same user and password. And infact share something...

2. If you want to SHARE the internet, you can use a gateway of some kind. For example winroute. If you want to connect them by using to seperate modems, you might want to either create a VPN or to find the ip's you have on one of the computers (from your service provider) and then connect using that over the internet (SLOOOW, 56k is NOT for file sharing!)...

Hope this helps a little

This discussion is closed to new replies.