Discussion Locked

RAS is slow.

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have set up RAS on a new server running MS Backoffice Small Business Server 4.5 and a workstation running NT Workstation 4.0. The workstation dials in and logs on fine, but the connection is so slow that it is practically unusable. I have tried using TCP/IP and NetBEUI with no noticable difference. How can I speed it up?

15 replies

by compaqer

What are you trying to do that is so slow....
- web browsing
- FTP transfer
- some business application
- file manipulation with Windows Explorer

Regards,
Jerry

by arif.cetin

wich modem types do you use? and your RAM ..
wich one uses and howmuch and wich services run on your NT

by stephen_ski

go into ras manager sleect the device and check it is the correct driver......in control panel select ports check baud rates of this port ..make sure WINS in NOT bound to the RAS ADAPTER ....change foreground performence boost is none is sys properties..
ALL this should help

by vinnyd

Sorry but ras is slow! IF your remote workstation is dailing in to run programs off the server it will be extremly slow. Using a 56k modem does not give you high speed access. The access wil be like running Windows on an old IBM PC.

Consider usings a remote control program like Carbon Copy, PC Anywhere, or one of the others.

Then you can dail in to the PC on the nework using the remote control program from the the remote workstation.

This way only the screen, keyboard and, mouse data is transferred thru the modem. The computer in the office actually runs the applications making the whole remote access process faster since you are not transferring programs and data thru the modem connection.

by trentcook

Dude, i dont think there is much you can do...Seriously, listen cause I will save you some headaches in trying to up the speed.

RAS IS SUPER SLOW...so I said fine, Ill set up a VPN...Guess what VPN IS SUPER SLOW.

I connected from my home PC which is about 1 mile away from our PDC and VPN server. I have ADSL at home as well, so from NIC to NIC VPN I found that it was just as slow as RAS modem to modem.

Sorry to sound so pessimistic, but show this to your boss so he doesnt think you cant do your job :)

If however you do boost up your speed...please let me know ;)

Later

Trent

by gregc

I agree with most people in Saying RAS is SLOW! The proplem is in the fact that Ethernet runs at 10mb or 100mb and a RAS connection through a ANALOG line is limited to 33.6KB . Your only hope for any speed out of RAS is to use ISDN and even then your maximum speed with be 128kb which is about 4 times faster than an ANALOG dialup connection. All of these connections are significantly slower than being attached VIA ethernet at 10mb or 100mb. Dialup at ANALOG speeds is 300 times slower the even 10mb ethernet speeds and 3000 times slower than 100mb ethernet!! Remote control will speed this up significantly as Your workstation at home controls a workstation at work and that only transfers Screen, keyboard and Mouse position. PC Anywhere will work over a RAS connection so Why not give it a try and see if it is acceptable. Good Luck

by avachon

This might speed you up. When a user logs onto WS, the user has to wait for NT authentication to occur. You can speed this up by looking at the users profiles under system|user profiles. Make sure your users are using local profile (locally cached profiles)so they are not waiting for NT server to go through the authentication process. It is also true that RAS is slow precisely because you are dealing with analog lines. If you have two dedicated lines, you also can experiment with multilinkwhich allows you to combine the bandwidth of two modems. This assumes users have access to two dedicated lines though. Best of luck

This discussion is closed to new replies.