Recover from a "SYS A: C:" from DOS flop
Did a "SYS A: C:" from a DOS 6.22 floppy to a working NT-workstation. Now it only boots to DOS.
How do I get it to boot to NT? I do not need multi-boot. Just want to get back to where I was.
Windows Forum
Did a "SYS A: C:" from a DOS 6.22 floppy to a working NT-workstation. Now it only boots to DOS.
How do I get it to boot to NT? I do not need multi-boot. Just want to get back to where I was.
by guy
You need an 'Emergency Repair'
If you do not have the three setup disks get the original CD and Winnt /ox or winnt32 /ox.
If you have a bootable CD, you could try placing the CD and when setup appears press R for Repair. A menu with four X appear, remove three X with Enter (or space bar) and leave the X in 'Inspect Boot Sector'.
Alternatively you could reinstall NT Workstation in the same place that it was before, it will not take long.
by jmoses
by swilliam
by jmoses
by shadoglare
by jmoses
This discussion is closed to new replies.
Sort by Trending