Linux

Ask something
Discussion Locked

Red Hat 7.2

0 helpful
1 reply

by javafreak

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone had problems with eth0 config on Red Hat 7.2 Pro? I am on a DHCP server behind a gateway router. The startup reports "Determining IP information for eth0 failed." This is a dual boot machine and the same nic card works for windoze. Thanksin advance!

1 reply

by rayblnc

I am running Red Hat Linux 7.2 behind a low end Linksys Cable/DSL router with an Intel Ethernet NIC. The router doubles as a NAT and DHCP server and I don't have IP assignment problems. DO you mean to say in your post that your Linux machine is acting as a DHCP server? In that case you may need a static address for it.

This discussion is closed to new replies.