Discussion Locked

Redirecting LPT1 to a USB printer

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
how can i redirect LPT1 to print to a USB port printer i have a program that can only print to LPT1. I can not connect printer locally as company policy does not allow this. the program can also not be modified to allow for network printing.please advise

1 reply

by scottsman

if I understand this correctly you have a legacy app. that you want to print to a network usb printer. However the app. does not have native support for network printing and cannot be modified. Based on my assumption being correct.
I would start with mapping to the network printer and try printing with word or notepad. if this succeeds go to the printer properties and find capture port and make sure lpt1 is captured for the usb printer.(start|settings|printers|right-clik on the printer and select properties what you want is usually on the ports tab)

alternativly with the printer already working for other apps. open up a command propmt (start|run|cmd(w2k/xp)command(w9x)) and at the prompt type

net use lpt1: \\name of pc printer is attached to\printers shared name
if this works you can place it in a batch file and put the batch in startup or you can type it in each time you reboot(pain in the bottom)

This discussion is closed to new replies.