Discussion Locked

Registry Crash: HKEY_CLASSES_ROOT

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone ever had an NT machine suddenly lose all registry classes listed prior to .hlp? If so, does nayone know a recovery method other than completely reinstalling all the software?

6 replies

by curlergirl

Never had that happen, and the only thing I can think of for recovery would be if you are using a backup software to back up the registry files. Software like Arcserve and Backup Exec has the capability to do this, but you have to configure the backup job correctly so that it backs up correctly. If you've done this, you should be able to restore from backup. Hope this helps!

by w.wilcox

Unfortumately, this particular PC was not included in the network backup strategy so that won't help. I am looking into drawing a copy of the registry from another machine and applying it to this one to see if I can restore some fucntionality to it.

by curlergirl

I was assuming this was a server, not a workstation. That should work for a workstation if you can find one that is identical or close to it w/identical software installed. You should be able to export the registry hive to a file and then import it back into the registry of the problem machine. The other thing would be to do a complete image of an identical or near-identical machine and then dump that image onto the machine that is missing the reg entries. I didn't mention this before, because the machine really has to be identical or as nearly identical as you can get it, hardware-wise, and you would need imaging software to do this, of course, like Symantec Ghost. Hope this helps!

by w.wilcox

Fortunately, these are two relatively identical boxes and I am planning on replacing only the missing portions of the registry data (ie, the classes prior to .hlp) only rather than the full registry. As for imaging, I shudder to think of trying to image these SCSI machines (old boxes, too). Thanks for the help.

This discussion is closed to new replies.