Discussion Locked

Removed network adapters

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a win2K machine I used at one time for ICS network in my home. I then purchased a router and used it for awhile. I now am back to the old ICS senerio and can not get it to work. I re-installed the network adapter I removed and Win2K recognized it as a new adapter. I now have conflicting adapter profiles in the registery and ICS will not run. What registery entries can be deleted to get back to square one?

7 replies

by magellanix

Disable ICS then remove the NICs, run windows, reboot, then re install the NICS then set the appropriate TCP/IP settings etc... then enable ICS.
Cheers :-D

by jimbiehn

I have deleted the NICS from the system and removed the hardware, but the registery still has the old NICS in it. When I re-install the hardware and enable ICS I get the error "would you like to give this adapter another IP address as it is assigned to a hidden NIC or a legacy NIC not in the system any more?" or something to that effect.

by fred07

BACKUP REGISTRY, remove nic card, BACKUP REGISTRY,
go to add remove programs and remove any nic program, go to devices manager and remove any nic devices. BACK UP REGISTRY,Go to networks in control panel and make sure nothing is listed there that crosses lines. reboot.BACK UP REGISTRY, Now do a reg edit and remove any nic registries,[in find] or any other associated registries. I would also back up everything on my HD that I could not lose as When all else fails I do a full format of HD froman ousource such as Maxblaster or WD's Data Lifeguard and start over with everything. I at least back up everything once a month and QB any time I use it.
Two reasons: 1 I have a stabler OS and 2 No hidden Trojans or Worms can survive it even though I have blockers for them. Have fun and Hope this helps.

by odypip

CAUSE
A network adapter with the same IP address is in the registry but is hidden in Device Manager. This can occur when you move a network card from one PCI slot to another PCI slot.
RESOLUTION
To resolve this problem, uninstall the ghosted network adapter from the registry:
Click Start, click Run, type cmd.exe, and then press ENTER.
Type set devmgr_show_nonpresent_devices=1, and then press ENTER.
Type Start DEVMGMT.MSC, and then press ENTER.
Click View, and then click Show Hidden Devices.
Expand the Network Adapters tree.
Right-click the dimmed network adapter, and then click Uninstall.
This article was previously published under Q269155 in Microsoft.

This discussion is closed to new replies.