Question Locked

Replaced Dell Inspiron 5150 motherboard will only boot to BIOS and stop

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have dell Inspiron 5150 laptop I bought about 3-4 years ago, last year I used the wrong adaptor with it and it stopped working. After that if you pressed the power button the front lights would only blink for second and it wouldn't do anything else so I preseumed I damaged the motherboard considering the history of the Inspiron 5150.

Recently I decide to fix it as it was a very good machine and I had never had any other problems with it. So I bought a motherboard off eBay and replaced the motherboard the instructions in the service manual. But I did not notice till I had it replaced that the last instruction was to insert the CD that comes with the new motherboard to accept the new BIOS. But unfortunately the CD didn't come with the mother board and the seller of the board doesn't have one. Now the machine boots just begins to load the BIOS and then stops.

Has any suggestions on where I should go now or what to Do?

I was gonna ring dell about but Im not sure if they will talk with me after they found out that I've changed the board myself.

6 replies

by mayhem1969

Is the bios loading and then stopping? What part is it stopping on?

Most boards come with the bios preinstalled. However, you can usually update the bios from the manufacturer of the motherboard or the manufacturer of your computer (in this case Dell). Go to the website. Type in your serial number in support and it should give you some recent downloads. Just download the bios(from another computer) put it in and boot up. It should allow you to flash the bios to the most recent version.

I doubt you will get free help from Dell, though its possible.

by mclougm4

Hi,
The BIOS status bar goes to about an 1/8 of the way and stops so the BIOS isn't actually loading.

I have downloaded the BIOS upgrades but as the machine doesn't get any further that just begining to load the BIOS I can't get to a MS-DOS environment to reflash the BIOS. Im not sure what else I can do, I might Check in case I didn't replace one of the components correctly. I have a feeling I may be flogging a dead horse.

Any suggestions or advice would be greatly appreciated.

by mayhem1969

It appears that there is some discussion in the Dell community about a known problem with this MB that prevents bios from loading. You might want to read these posts, sounds similar to the problem you are having.

http://www.notebookforums.com/post2239335.html

Also, you can go the Dell website for support on your model (in this case its Inspiron 5100, which should include your 5150) Dell has a bios download that's called a "bios executable file" that will help you load the OS. Here's the link.

http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=5466&libid=1&releaseid=R87515&vercnt=8&formatcnt=0&SystemID=INS_PNT_P4_5100&servicetag=&os=BIOSA&osl=en&catid=-1&impid=-1

Let us know if this helps. Good luck.

by mclougm4

Hi,
I decided to ring dell as a last resort, I wasn't expecting much help but I was pleasantly surprised. I didn't mention to the support guy that I had change the motherboard I just explained the problem of how it would not load the BIOS and he gave me the following instructions:

1/ Take out the battey and power supply, and hold down the power button for 20 seconds. He then asked me to put the battery back in and restart the system. But the same problem occurred.

2/ He then asked me take out the battery, connect the AC adaptor and then hold down the function Key and press the power button. I did this and again the same problem occurred.

3/ he then asked me to turn the laptop over and take out the RAM. He then asked me to put the RAM back in and put in the power supply and press the power button. Then happy days, it booted the BIOS and slowly booted windows.

I asked what caused the error and what exactly did this sequence do but he wouldn't answer me. But the machine is working OK and no obvious problems so far. Does anyone have an Idea of what actually was wrong and what does this sequence do? Reset the BIOS to Factory Defaults?

Thanks Mayhem1969 for your posts

by mayhem1969

The fact he was so willing to help indicates to me that yours is a common call to Dell. The fact he won't tell you why it did it indicates its a more prevalent problem then they'd like to admit. Congratulations.

This discussion is closed to new replies.