Question Locked

Restricting access to specific files on my network when accessed by wireles

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
Im having a problem at the moment with a classroom manager program that is installed on a central computer on a school network that teachers can access from their laptops. The program's database is rather large and does not (following advice from the people who wrote the program) like being accessed and modified over a wireless network as it experiences time out errors with the 802.11g 54mbps speed. Is there a way that I can restrict access to either the folder or computer that the database and all its configuration files are stored in so that the program can only be run over a wired network connection??
any suggestions would be appreciated.
Thanx,
John Calder.

4 replies

by tintoman

I think thats a really interesting question and I would have thought that this would be possible by restricting routing to that machine by mac address or something.
Perhaps a few more details about the network set up would help.

by john

It is a very simple setup. There is a main router that acts as a DHCP server that is connected to wireless routers in each classroom. The classroom wireless routers have no wan settings in them so they just act as wireless switches back to to the main router. The network is fed internet by a single modem through the main routers wan port. The admin software in question is stored on a PC in the admin area. This computer has a static IP.
What i am having issues with when I think this through is how can i seperate the wireless IPs from the wired ones when everything is fed from the same DHCP server? Would i have to get a seperate DHCP server to feed the wireless routers and block the admin pc's ip address in that one?
If you want to know more or if ive confused you by what ive said just message back :D
Many Thanks,
John.

by michael kassner

The simplest method would be to isolate all wireless connections to a specific VLAN. Then setup an access rule that prohibits access to the server running the specified application by any computer with an IP addr from the subnet being used by the wireless VLAN.

This discussion is closed to new replies.