Discussion Locked

SBS and SonicWall Pro and T1

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is anyone aware of any attack or corrupted content that would result in the following?

We're running SBS 4.5 w/Exchange 5.5. Have a new (March) T1 with voice and data. Between the two a SonicWall Pro with the latest firmware. Yesterday a.m. no Internet and I saw right away the Test and Alarm lights on the firewall were on solid. Power cycle the firewall, same deal. Can't even reset according to manual's instructions. So I have a tech. come in with a loaner Pro VX for a few days until he can have delivered and configured, a new firewall. Now, a day later, still on the loaner, the Pro VX locks up pretty regularly (4 times so far today and it's just lunch time) but will recover when I turn off and on again, unlike the now dead Pro.

Does this sound familiar to anyone? The logs are cleared when I turn power off to the firewall. No clues in the Windows Event Viewer.

Thanks!

1 reply

by cliff680

You can configure the Sonicwall to e-mail the logs to you. Maybe then you can see (read) them before the machine goes down and the logs get cleared.

This discussion is closed to new replies.