Question Locked

screen replacement

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hello

does anyone know how to replace the screen for a Compaq Presario 2500 laptop or have a link to a site that shows how to do it

thanks

3 replies

by mjd420nova

Compaqs are pretty simple, they either use screws on the front under little rubber plugs or are press fit together. To seperate the halves you need to use another piece of plactic with a sharp edge to seperate the halves at the seam, split the seam and work it all the way around. Be careful, no metal ot it will gouge the pladtic or crack it. Once th bezel is off, you'll be able to see the screws holding the displa in place. Good luck This is not a job for a doit yourselfer or a beginner.

by xt john

is the ribbon connector that connects the monitor to the motherboard. Sometimes they use a sliding 'lock', a plastic collar that holds the ribbon to the motherboard. Be careful in prying up the collar, and be careful with the ribbon itself.

This discussion is closed to new replies.