Discussion Locked

Server 2003 Superscope help

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to add a new DHCP scope to a superscope I have running on a windows 2003 server. The current pool of address is:
172.16.0.26~199/16
I'm trying to add:
172.16.1.2~254/16
Which according to MS I should be able to do, but every time I try to add the new scope it tells me it's conflicting with an existing scope. Any help would be appreciated.

3 replies

by bfilmfan

How many subnets and how many hosts per subnet have been created?

Depending on this answer, you range requested, might well fall into another range.

You might find this site of assistance with your subnetting needs:

http://www.subnetmask.info/

by bfilmfan

How many subnets and how many hosts per subnet have been created?

Depending on this answer, you range requested, might well fall into another range.

You might find this site of assistance with your subnetting needs:

http://www.subnetmask.info/

by tommy_duong

Look at your existing Scope - 172.16.0.x/16 which already cover everything from 172.16.0.xxx - 172.16.254.xxx - So, unless you create another Scope subnet with 172.17.x.x/16, otherwise you cannot create anything that fall in the range of 172.16.x.x again. Anotherway you can do this is change the existing scope to 172.16.0.26-199/24 (255.255.255.0) then you would able to create as many as 172.16.x.x/24 as you want.

This discussion is closed to new replies.