Discussion Locked

SHUT DOWN COMPUTER

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
MY COMPUTER WONT SHUT DOWN I DONT KNOW WHAT TO DO I HAVE TO JUST POWER IT OFF AND I NEED TO FIX THIS WHEN I GO TO SHTDWN IT SHTSDWN AND THEN REBOOTS WHY AND HOW CAN I FIX THIS.

19 replies

by sgt_shultz

at the shutdown screen, is 'shutdown' selected? sounds like 'restart' is selected...it keeps whatever setting was used last...btw which operating system?
hope this helps.

by thechas

First, check if you can shut off the PC when you boot from a DOS boot floppy.

After booting from the DOS floppy, hold in the power button for a few seconds, the PC should turn off.
If it does not, you have a hardware problem.

I have had to scrap several motherboards for problems with the power control circuit.

Start by checking in BIOS settings that shut down is the default for the power button.

If it shuts down from DOS, then you have a Windows problem.

Start by updating your video drivers.
I would in order update:
Chipset driver for the motherboard
DirectX (from Microsoft) verify the version supported by your video card.
Video card driver.

If that does not fix things, run Windows Update, and install the shutdown suplement. That corrects Windows problems 95% of the time.

Still having problems, go to www.aumha.org
They have a very good Windows Shutdown Problems troubleshooting guide.

Chas

by dmiles

Check the Microsoft knowledgebase for OS shutdown supplement
The question is to vague to narrow it down to hardware or software

by saihib

This problem usually occurs when you use incomplete words and type in all caps.

by luckygirl

Shutdown problems in Windows 98 can be caused by any of the following issues:
Incompatible, damaged, or conflicting device drivers (example port by severable devices in use)
A damaged exit sound file
Incorrectly configured or damaged hardware
To troubleshoot these issues perform the following steps in order, one at a time, testing after each step to determine if the issue is resolved. If the issue is not resolved, try next option. If you have installed new hardware or software on your computer, uninstall it and check to see if your shut down problem is resolved. If it is, contact the manufacturer of the hardware or software. If not then I do not know any solution anymore. Hope this will help you !

by ctmoore1998

First ensure that when you select to shutdown your computer that you are selecting shutdown and not restart. Windows 95 with IE 4 update and Win 98 remember the last shutdown that was selected and use it as the default the next time windows is shutdown. Check power management in bios and make sure the any wake on event options are disabled. This seems way out there but one other thing that it may be is the ACPI power management may be corrupted in windows, if you have an MB with intel chip set there are a couple of updates at intel to update windows for the chipsets find the one for your OS and give it a try.

by dj61

What operating system are you using? Windows XP has a compatibility issue with Roxio's CD burning software that causes it to reboot, whether you select shutdown or not. There is an update on Roxio's website to address this.

by cglrcng9

Try this if the puter is stand alone & isn't networked. Start>Settings>Control Panel>System>Device Manager, Open Network Adapters by clicking the + sign, then double click on the Dialup Adapter, then any other Adapters listed 1 @ a time. In each, go to the Drivers Tab, Then Driver File Details Button...After the details window opens...scroll down and see if the last driver file listed is REDIR.VXD ? Don't make any changes yet. Close the adapter windows by backing out, check the others the same way. Are all of the last driver's listed as REDIR.VXD? You can now know what sometimes causes a loop of restarts to happen.

Now I'll tell you how to check out if a problem actually exists there and how to fix it. Boot to the windows boot menu and choose to Boot-Log.Txt, seek out the log file after it boots and look way down the list for an incomplete REDIR.VXD hang.

If you found it, the problem isn't happening on shutdown, it is on the boot up, but it's constantly an unfinished hangthat needs to complete before shutdown can happen properly.

Now for the fix I found. You probably use a dial up modem, & have no network installed therefore you have no reason to have the "Client for Microsoft Networks" Installed which has installed the REDIR.VXD drivers on your network adapters.

Now go back to your network adapters in device Mgr. and uninstall the "Client for Microsoft Networks"...it will promptly build a new driver database (usually without even the Win98 or ME CD), and it will change those last listed drivers (and a few others), getting rid of REDIR.VXD and that incomplete item hang. Shut down normally and restart time & again cleanly w/ ease.

It took 12 hrs. to find that prob. & relatively quick fix originally on an XP machine and have seen it many times since. If it works for you please assign the points, as it takes a while to type this out @ least.

This discussion is closed to new replies.