Discussion Locked

shutdown---windows 2000 professional

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

when i go to shut pc--i click on shutdown---it goes thru the motion fine----but a screen appears and says it is ok to turn off your computer--

is there any way just to hit shut down on the pc---and it will automatically turn off my computer without me manually hitting the button on the pc---need your help----robert

5 replies

by ozmedias

Dig around in your BIOS setings, I'm sure it is a BIOS default that just needs override.

by jwilczyn

1st Check MS Q216573 ? How Windows Determines ACPI Compatibility.
2nd Go to >Control Panel> Power Options and check/change settings.

by vrajan18

If your power supply is a latest model you can automatically shutdown pc. In bios setting you can find one option POWER SUPPLY AT/ATX. Put the setting as atx.It will solve the problem.

by ctmoore1998

When you boot your PC enter bios and check power management if the option for ACPI power management is there be sure it is enabled, if you have to enable it then boot into windows and go into my computer control panel add new hardware and redetect the hardware, You can also check to see if windows already has ACPI by going into Device Manager and looking under the computer property if it say ....ACPI then it is already enabled in BIOS if not then enable and redetect hardware once ACPI is detected by W2k then when you shut down the system should turn itself off.

by voldar

You can enable the power management by doing this:
go to MyComputer>Properties>Hardware>Device Manager. Expand VIEW and choose Show hidden devices. You'll see a new input named: Non-Plug and Play Drivers. Expand it and choose the APMI to be istalled.(or ACPI).

This discussion is closed to new replies.