Discussion Locked

Small Win 98 Network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We're trying to make a small PC lab (4 computers)of Windows 98 machines connected with CAT5 cable to a hub. I have done something similar to this before, using Win 95 PCs and I've totally forgotten how to do it. I can't get the PCs to communicate,but I know that this can be done.

If anyone has the time/patience to explain how to do this, please do.

3 replies

by justanadmin

Make sure of the following:

1. All of them have to be on the same network, so IP addresses should be in the same range and they have to have the same subnet mask.
2. Make sure they are all part of the same Workgroup.
3. Make sure file and printer sharing is installed in the network properties.
4. Share the resources you intend to use.

That should be about all there is to it. If you need any further help, just post a comment!

Good luck!

by dragon emperor

Make sure that all of them are running the same Protocols (should be only TCP/IP unless you have specific need for others).
Also make sure that the TCP/IP is setup to use NETBIOS (so you can see the machines in Windows Explorer).
IP Addresses should be on the same subnet (using a router with DHCP and NAT instead of a hub would simply things for you).
Enable File/Printer Sharing as desired.

This discussion is closed to new replies.