Discussion Locked

SMS remote control shuts down

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm working with SMS 1.2 and when I try to remote control a NT workstation from my NT workstation the SMS administrator shuts down. I tried installing the SP4 but it didn't work. Does anyone know why this happens?

5 replies

by avidetto

This could be one of three things. First check to see if you or your client system has a mouse filter on the system. This will cause this issue (technet). The other thing it might be is the system resources on the client machine. (I assume you are not running 2.0 & 1.2 on the same network, if so verify that the 2.0 did not try to install this machine.). If this doesn't work, try this...(if you have ntreskit)...Rclient into the machine & remove & re-install 1.2 on the local client. Good Luck- Al

by avidetto

This could be one of three things. First check to see if you or your client system has a mouse filter on the system. This will cause this issue (technet). The other thing it might be is the system resources on the client machine. (I assume you are not running 2.0 & 1.2 on the same network, if so verify that the 2.0 did not try to install this machine.). If this doesn't work, try this...(if you have ntreskit)...Rclient into the machine & remove & re-install 1.2 on the local client. Good Luck- Al

This discussion is closed to new replies.