Discussion Locked

SOHO <-> Internet Problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

One of my clients have a small office with a W2K Server and 4 stations running W98.

He asked me to connect all of them thru a single telephone conection to Internet.

I've tried the NAT configuration instead of the connection sharing because I thought it would let more room for future spread.

I followed the manual, everithing seems OK, the IE5 on every machine is set to not to dial out and to automatically detect conf. The server connects to the internet -because I'm actually writing this question from it- and detects activity over the lan, because it initiates the dial-on-demand when any stations tries to rise up IE but... there the story ends, theres no connection from the stations on the LAN to the Internet.

I've tried everything I can figure out... uselessly and I don't want to give up W2K on behalf any shareware proxy...

Any help woud be appreciated.

5 replies

by mckaytech

I'm not sure I understand how you have it set up because NAT is part of the connection sharing and the two are mutally dependent.

There is an article on TechNet (Q237254) that describes some of the limitations on the W2000 implementation of ICS (connection box can't be a DNS server, DHCP server or Domain Controller) so you might want to see if any of those apply.

I agree with your thought of not wanting to give up on W2K in favor of a shareware proxy, but this sounds like a perfect application for something like an Intel or 3Com LAN modem if any of the limitations listed above turn out to be factors.

Of, if you are running Win98SE on any of the workstations, you could use the ICS function on one of them.

paul

by mckaytech

After giving it some further thought and looking at the setup and the transcript of a Webcast that Microsoft did on ICS in W2K, I think I have a better answer.

The NAT function that you probably enabled is for operating behind a NAT router (in other words, where your server is NOT doing the NAT). I think if you disable that, you should be okay.

But there is one other issue that may be impacting you. Microsoft has identified a "feature(bug)" in W2K ICS that results in dropped connectionsif the MTU on the ICS client is not right (see article Q237254).

While you're there, you may want to take a look at the Webcast or the transcript of it (or the Powerpoint version, which is in a file name of wc122199.ppt). It's actually pretty good.

paul

by mckaytech

Okay, one more revision - the article number on the MTU bug should be Q264883.

Okay, I'll sit down now....

paul

This discussion is closed to new replies.