Discussion Locked

Solaris-9 Install fails on Sun Ultra 60

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install Solaris-9 on Sun Ultr 60 with OBP 3.24. although I place CD1 in cdrom drive it does not start on boot - cdrom and i cannot cd to cdrom or ls. CDROM seems ok as tested on another system also the Solaris-9 media is good.
How can I install solaris-9 on this machine?

10 replies

by techrepublic

Run the following tests at the PROM.

test-all
probe-scsi-all

If you don't see a SCSI CD drive when you run the probe, that's your problem.

Another favourite, is if the CDROM SCSI ID has changed, or the devalias for the drive has changed - all worth checking once you're sure the machine can see the drive.

by mspatel

Psobe-scsi-all is showing cd-rom.
alias to boot changed from cd-rom tried but not worked.
Environment looks ok.

by mspatel

Is it possible to Boot Ultra-60 from network connection to another machine-to-use-cdrom for Install. I have no idea how to?

by mspatel

2nd Option How can I bot from floppy drive, is there bootable solaris9 floppy which I can make and will that support cdrom.

by ghislain.levesque

if you are not able to boot from the installation cd, try to create an install server somewhere else and boot from the network to install solaris 9.

by mspatel

Poster rated this answer.
This is good idea but my skills to setup and bootup on network is zero. Pls provide more details. Also my 2nd choice to boot from floppy is worth try- kindly guide on this as well.

by ghislain.levesque

On any other Sun server:
- run the setup_install_server script from the SOL 9 cdrom.
-When the script has completed, insert the Solaris 9 Update 2[3|4] (2 of 2) and complete the installation of the Solaris 9 image by running the add_to_install_server
script.
-setup the client's IP and Ethernet address information in the corresponding hosts and ethers files respectively.
-Setup the client for booting over the network by changing to the directory where the install image resides and running the add_install_client script.
# cd /install_dir_path/Solaris_9/Tools
# ./add_install_client hostname sun4u
- now type boot net on our ULTRA60

by mspatel

Poster rated this answer.
My Second Sun Ultra-1 have 2gb only. Not enough to hold image. Please guide for floppy drive bbot solution and also if floppy can cd to cd-rom?

by ghislain.levesque

try this...:
boot cdrom -F wanboot - install

Question for you: Are they original Solaris 9 CD?
Can you boot on the other Sun with it?

This discussion is closed to new replies.