Discussion Locked

Spool 32 caused an error in (unknown)

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have just developed a slight problem with an error message

Spool 32 caused an error in (unknown)
Spool 32 will now close.

If you continue to experience problems,
Try restarting your computer

I have restarted but it still comes back.I am running Windows ME
Packard Bell 9450K
Pentium 3 450 MHz
Ram 128 MB
Video Memory 8 MB
Hard Disk 16 UDMA
Motherboard Packard Bell Media Thunder
Fax/Modem Packard Bell FD 56
Sound Card Creative ES1373 (64Voices)

6 replies

by charles byrne

Spool32 results from a spooler error.
Spool32.exe is a Windows component that manages the spooling of print requests. It could be a number of things that causes this.
Possible fix:

1. Right Click on the printer you're using
2. Select Properties
3. Select Details Tab
4. Spool Settings
5. Click Print Directly to Printer
6. Format should be changed from EMF to RAW
7. Click Ok and restart Windows

If that doesn't fix the problem, the printer
driver may have coding errors, or a TSR program may be preventing Spool32.exe from being run.

You could try update or change the printer
driver. If that doesn't work you can try to add a line to the [Windows] section of the WIN.INI
file and enter the following:

C:\\System\spool32.exe
where MY_OS is where WINDOWS is installed.

Hope this helps,
Charles

by dirvine

I have had this problem before when using my accounting program at work. Restarting the computer and them turning the printer on (after the computer has started) will generally allow you use the printer again. It is fast and easy to do, the other thing I have done is reinstalled the driver for the printer. This has cut down on the number of times I get this error greatly.
Regards, I hope this will help you.

by dirvine

I have had this problem before when using my accounting program at work. Restarting the computer and them turning the printer on (after the computer has started) will generally allow you use the printer again. It is fast and easy to do, the other thing I have done is reinstalled the driver for the printer. This has cut down on the number of times I get this error greatly.
Regards, I hope this will help you.

This discussion is closed to new replies.