Discussion Locked

Time Synch

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Howdy Folks. Getting some errors about W32Time in my event logs. Not too familiar with setting up servers to do time synch from an outside source. Can anyone point me to a good source, and also provide some instructions on how to configure? Any helpis appreciated.

Dennis Jones

5 replies

by sfix

There's tons of verbose instructions in the Microsoft Knowledgebase. In short, do a google search for Public Time Servers to find an IP to use for your time zone. Then configure your DC with c:\net time /setsntp:(ip address of time server). You'll need the ntp port open outbound on your firewall.

I believe that's all you need if you're running AD, but If you're using an NT PDC it get's a little more involved. I'm using the NT setup, so if you need more info, let me know.

This discussion is closed to new replies.