Tripple boot
I need to know how to put NT 4 Server, 98, and windows 2000 Server all on the same computer.
I have 2 HD, 1=14gb, 2nd=17gb.
I would like to run NTFS, and FAT32 if i can.
Windows Forum
I need to know how to put NT 4 Server, 98, and windows 2000 Server all on the same computer.
I have 2 HD, 1=14gb, 2nd=17gb.
I would like to run NTFS, and FAT32 if i can.
Create a FAT 16 partition on the first drive. Make it a couple of hunderd MB and format with DOS.
Install Win98 to the next partition on your first drive. Use Fat32 if you like (but NT won't see it then)
Install NT to the remainder of the first drive. (Win98 won't see the NTFS data)
Install Win2000 to the second drive (it will see all partitions)
---
At home, I have a single 20GB drive, running 98 and 2000Pro, with space for 2000 server.
This config WILL NOT work with NT as NT will not see a FAT32 boot partition.
1st part: 4GB Fat32 (98)
2nd part: 8GB Fat32 (DATA)
3rd part: 4GB NTFS (2000Pro)
4th part: 4GB NTFS (reserver for 2000Server)
by jjontry
by rheimsness
Check out KB Articles Q157992, Q170756, Q244632, AND Q94405.
Following scenario used for NT, DOS and 95:
You can use third-party software solutions or the following Microsoft-supported method to triple-boot your system. I recommend running FAT16 on everything.
1. Install MS-DOS.
2. Install NT.
3. Save bootsect.dos. This system file is usually hidden and has read-only attributes. Boot to DOS (or NT), and remove the attributes at a command prompt by typing
attrib ?r ?h ?s
4. At a command prompt, copy the DOS boot sector by typing
copy c:\bootsect.dos c:\bootsect.sav
5. Boot to DOS, and install Win9x.
6. Repair the boot sector for the NT installation. This repair creates a new bootsect.dos file for the Win9x installation.
7. Repeatstep 4 with the Win9x bootsect.dos file.
8. Rename the Win9x bootsect.dos as bootsect.w40.
9. Rename bootsect.sav as bootsect.dos.
10. Remove the boot.ini file?s attributes.
11. Use any text editor to modify boot.ini (I prefer the command-line program Edit). Open boot.ini, and add the following commands to the OS section:
c:\bootsect.dos="MS-DOS v6.22" /win95dos
c:\bootsect.w40="Windows 95/98" /win95
The next time you boot to NT, you?ll have the additional choices of Win9x and MS-DOS 6.22. You must include the new switches, /win95dos and /win95, so NT Startup acts as the multiple-boot process of Win9x.
PS: There are utilities available for 95/98 to read NTFS and for NT to read FAT32.
by jjontry
by jjontry
This discussion is closed to new replies.
Sort by Trending