Discussion Locked

trying to remove windows 2000

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to remove windows 2000 from an amd k2 based machine. I have tried using a:\sys c: command but it doesn't work. I get a message
Cannot obtain exclusive access to drive.

I have also tired using a:\sys c:\ but I get a message:
Required parameter missing

7 replies

by thechas

First, you do not need any slashes for the sys command.
The command is sys c:

Second, what version boot disk are you using?

If W95 or W98, you likely cannot access the drive as the default file format for a W2K drive is NTSF.
Neither W95 or W98 boot disks can access a NTSF formatted partition.

You will need to back up any desired files from within Windws 2000.
Then, boot from your startup disk, and run fdisk.
Follow the prompts to delete the NON-DOS partition(s).
Re-boot, and run fdisk again to partition the drive as desired.

For more information, visit
www.fdisk.com/fdisk
www.aumha.org (check out the partitioning articles)

Your only other alternative, would be to use the latest version of Partition magic which includes a utility to convert a NTSF drive to a FAT32 drive.

Chas

by edward.billy

I am dual booting 98 and 2000. windows 2000 didn't install correctly and I am trying to remove it. I ran fdisk and the c drive is fat32.

by thechas

Do you have the drive set up with seperate partitions for W98 and W2K?

That is the best way to go.

You need to run the sys command from a W98 startup disk boot.

It will not work from the DOS prompt.

Alternately, go to www.systeminternals.com
and look through their boot.ini command list.
You can edit boot.ini, and remove the W2K boot option, thus booting directly into W98.

Chas

by jdaz

You can use Windows 2000 boot up disks to boot and remove the NTFS partition. Afterwards you can format the partition using WIn98 CD for FAT32.

This discussion is closed to new replies.