You should ALWAYS set the IP address of your server statically. It doesn't matter what the initial install sets the NIC to - you can control this by going to the IP properties and manually setting an IP address as described in the previous answer. Before you run DCPROMO, set the IP address to a static address; you can use either a 10 address (i.e., 10.0.0.x with subnet mask 255.255.255.0) or the 192.168.x.x range. Either one will work. Set the default gateway to itself and leave the DNS entries blank. If you've already installed DNS, uninstall it. Then run dcpromo - this will install and initially configure DNS for you. Afterwards, do two things:
1. Open up your DNS zone, and go to the Forward Lookup Zone folder. If you see an entry designating the server as a root server "(.)", delete it. This will allow you to use DNS forwarders for external (i.e., Internet) IP addresses if you want to have Internet access on the network.
2. Check your NIC properties and make sure that the server is pointing to itself as the DNS server. If not, enter it manually.
Hope this helps!