Discussion Locked

Unable to boot into Win 2000 Op. System

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a compaq 5716 Presario which I updated to windows 2000 from Windows 98. The upgrade was a success. I installed a Driver for the Compaq DVD player, and now the computer does not boot into the Op system. The system boots to a point, then as it gets to go to the desktop, it reboots. How can I fix this problem? I tried to boot into safe mode, etc, nothing works.

9 replies

by lonnie_28

I attempted to boot to last Kown Good Config, but it keeps hanging. I did download the driver from Mediamatics.com for win 2000.

by wim

Boot from the windows2000 cd, run setup and select the repair option, worked for me...

by lonnie_28

Thanks for your help, wim@kennis.be. Unfortuantely I tried that also, but i keep getting a Disk I/O error.

by tearley

Have you tried booting from the w2k cd into the recovery console, then try typing FIXBOOT or FIXMBR.

by tearley

This is a bit long winded but should help. Firstly you need to have a win2k upgrade disk. Boot from CD, you will then be asked if you want to install new, or repair Win2k. Choose install new. The next screen will then inform you it's looking for a previous version of windows. It will then find you current w2k and ask again if you want to repair or install fresh. This time choose repair. Wk2 will then reinstall a few exe and dll files. When it's finished w2k will come back up. You may get a problem with the logon causing the system to reboot. This can be repaired by again booting from the cd into the recovery console and deleting winlogon.exe from your HD and extracting it again from the w2k cd. Then restarting you system, now you will haveW2k up again with most applications still working. The only one I had trouble with was Outlook 2000 so just have the MS office cd handy just in case. Otherwise 100%, oh and before you ask, yes I have tried this on my PC last night to recover from a SP3 wonder.
Hope this i
s more helpful than my previous answer.

This discussion is closed to new replies.