Discussion Locked

Unable to install wireless network card

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

PC running Win98SE fails to sucessfully boot after installation of a Linksys WMP55AG PCI card. The drivers for the wireless card were sucessfully installed first before installing the card (per instructions), but upon power-up after installing the card the PC hangs on the Win98 splash screen. A re-boot caused the computer to enter safe mode. After a restart from safe mode, I am able to login in to windows and new hardware is detected, but new hardware detection s/w cannot find WMP55AG.CAT (nor can I).

Also the video is 640x480, 16 colors and windows conplains that not all video drivers are installed. I am able to change the resolution to 1024x768, 256 colors but when I change to 16 bit color the screen goes blank and the PC hangs.

There are no conflicts shown on Device Manager tab of the My Computer property sheet. The video adapter is an ATI PCI adapter but I also have had the same problems with a Matrox PCI adapter. I have the latest BIOS and motherboard sys drivers installed and the same vireless card successfully installs in another computer with a AGP adapter. However I have had problems install the card in that computer when a PCI adapter is installed.

Removal of the wireless adapter corrects all problems and restores the video to 1024x768, 32-bit color.

I have contacted Linksys support (now there is an oximoron) but they are still in denial. Their suggestion was throw away the computer or install the network card without a video card installed (I'm still working on that last one).

I have also tried installing the cards in different PCI slots.

Has anyone run into this problem and what was the resolution?

3 replies

by sgt_shultz

this is fixable. i think it is windows, not linksys but i would be suspicious given all the weird problems with linksys stuff also. guess windows thinks it's done it's plug and play job correctly but it sure sounds like there is resource conflict between resources used by wireless card and video card. write down resouces used by video. write down resources assigned to wireless nic. interrupt and iobase. then try forcing wireless card onto other resources or forcing video card onto other resources. if you cannot force stuff thru windows device manager by unchecking automatically allocate resources box and picking iobase and interrupt yourself, consider loading dos drivers for video or wireless cards and setting interrupt and iobase in them...are you pre-allocating any interrupts to pci slots in BIOS? you can also try removing OTHER cards (sound, modem, network) then see if you can get wireless card to install. then add other cards in...

by david.smoll

I have also tried manually assigning IRQ to each PCI slot via BIOS setup and installing the wireless card with only the video adapter install. Both cases the result was the same as before. I have yet to try manually assigning IO addresses, but no conflicts are listed in device manager.

by w2ktechman

This would be a guess, but it may work, it sounds like the driver file for the video card is being used by the linksys card (or a dll). which causes your drivers not to work. Try reinstalling the video driver in a different directory than where it is located. Also look to see which other files may be shared, and copy them into the same directory as the driver files for both the video and wireless cards.
Like I said, it is more of something to try than an absolute, and it probably wont work, But, it may!

This discussion is closed to new replies.