5 replies
by anthtone56
Ok here is what to do:
1. Check your network plug is connected in.
2. Depending on the network you have: check the lights on the hub that they are working. If one computer to another via a network cable, make sure it is a cross-over cable.
3. Make sure that the modem has the telephone line into it and not the LAN cable into it. (Some cable modems allow the modems to be connected directly to the LAN via a LAN cable).
by drdon
If you do not have a "network" then the red X is correct. When you dial in, you can show the properties for the dial in connection and and have the icon show in the tray that you are connected.
If you have a network and the cabel is plugged in, go to device manager and check the performnace of the NIC.
by tang
by rcom
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending