Discussion Locked

Updated Processor from 1.9G to 2.4G

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Why is it that I now cannot see any Processor in Hardware>Device Manager? Also when I right click on my computer I can see the old and new Processor even though I have a single processor system. Also when I go to system information I can see a processor that is only 1.89G and not the 2.4G that I recently put in it.

So how do I know that my system is now running at its full partential? Is there a tweak that I must apply to it?

I am running on Windows XP Pro, P4, 512Meg Ram

1 reply

by thechas

There are 22 DIFFERENT P4 2.4GHz CPUs!

With 3 different front side bus speeds.

If you got the wrong CPU for your motherboard, it may still only clock out at 1.9 GHz.

The 6 1.9 GHz P4's all have a 400MHz FSB.

You need to either get a different 2.4GHz CPU, or, if your motherboard supports a 533 MHz FSB, you may need to enter BIOS setup and change the CPU speed settings.

Keep in mind that your RAM also needs to support the faster FSB speed.

Chas

This discussion is closed to new replies.