upgrade cpu with win2k
when upgrading a AMD cpu from duron 950 to an AMD 2000xp on a windows 2000 box I continue to get errors do I have to reinstall the os I have upgraded the mother board bois already
Thanks in advance
Harry
Windows Forum
when upgrading a AMD cpu from duron 950 to an AMD 2000xp on a windows 2000 box I continue to get errors do I have to reinstall the os I have upgraded the mother board bois already
Thanks in advance
Harry
by blaine moore
by harjoan
by thechas
Was this just a CPU change?
Or, did you change motherboards?
If you did change motherboards, Microsoft recommends a clean install for W2K and XP systems!
The knowledge base article has come up missing since they changed their naming protocol.
If you would like, I can e-mail a copy to you.
If this was just a CPU upgrade, make sure that ALL the CPU and Memory clock speeds are set correctly.
For the Duron CPU, your FSB was 100MHz, or 200MHz.
RAM clock may have been either FSB (100MHz), or FSB + PCI (133MHz) for SDRAM.
Or FSB for DDR.
Your new Athlon XP CPU, needs a FSB of 133MHz, or 266MHz, along with the appropriate multiplier to get to the actual clock speed ~1800MHz.
RAM speed may need to be adjusted.
You may have RAM that does not perform properly at the higher FSB speed of the new CPU.
When you flashed the BIOS, did you reset the CMOS memory?
Often when you flash the BIOS, the storage location or word format for some BIOS settings change. Resetting the CMOS clears away any bits from the old BIOS settings.
Chas
by harjoan
by harjoan
This discussion is closed to new replies.
Sort by Trending