Is that it has some strange Habits when it is turned off for a couple of days and you then boot the system.
I've seen examples where 7 Insists on Repairing itself which doesn't work and if you ignore the request and allow it to boot it works quite OK.
I've heard complaints about work computers running 7 changing the User Data Settings to unavailable on the restart after a few days of being off as well.
This just sounds like another little issue with Windows. If you restart the system again it may work but you are just as likely to need to repair the install to get this working correctly again.
The reality however is that 7 is still a new M$ OS and shouldn't be used in a Production Environment unless you are prepared to loose time and money when it doesn't work right. Also before moving any computer to a new OS you should always run the supplied Upgrade Adviser to check to see if there is any issues with the existing system.
http://www.microsoft.com/downloads/details.aspx?displaylang=en&familyid=1b544e90-7659-4bd9-9e51-2497c146af15
Naturally if there is any unsupported Hardware you shouldn't even consider using the new OS as that Unsupported Hardware is going to give you problems.
Col