Discussion Locked

URGENT:Toshiba Laptop w/DOS on HD

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Toshiba Laptop (1805-S274) with DOS 6.22 installed on the hard drive. I need to load Windows XP, but the CD-ROM drive does not work. The CD-ROM is integrated into the motherboard and cannot be removed or replaced. I have an external CD-ROM drive w/USB 2.0, but the system will not recognize it. How can I solve the problem: ie: Installing Windows XP on the hard drive?

Thank you,
Frenchfries

14 replies

by drb63

Unless you're loading DOS drivers for the USB device, it won't recognize the drive. Find out whether it's possible via DOS. As for a quick solution: purchase an external CD-ROM drive that supports LPT.

by frenchfries290

Poster rated this answer.
I attempted to use a dos driver(duse49.exe), but it wouldn't work. Error message said it would not work in the dos mode. I don't want to go with a SCSI solution. I'm waiting on a cd-rom backpack w/parallel interface.

by cg it

Another option is if you've got a floppy drive as well as a CD Rom get a W99/ME emergency boot disk which will have generic CD Rom drivers on it. Choose the option to load CD Rom support then once your booted to the A: prompt change drives to your CD then command prompt run the XP .exe setup file.

by cg it

I missed the CD Rom won't work meaning it's broken and can't be repaired. I took the CD Rom won't work portion of the program meaning there's no MSCDEX CD Rom Drivers loaded in the DOS 6.22 config.sys file SO the drive is not accessable. Didn't get it that it's broke. If its just a matter of drivers and adding CD Rom support in the config.sys file for DOS, I've got an old copy of CD ROM support drivers which will automatically change the Autoexec.bat and Config.sys files for CD Rom Support. 1.1 mb file.

I can send it if you want.

by sgt_shultz

well, you are asking for it installing xp on old laptop with bad cdrom. but you knew that...
depending on how you are setup in your workshop, one idea might be:
take out laptop hd, get ide cable adapter for it and put in desktop. copy over install xp install files, move back into laptop.
theChas has mentioned here that he keeps a removable drive tray setup in his desktop for hooking up laptop drives. which i think is extremely nifty. not all laptop-to-desktop ide adapters will work. you will have to check it out...
flash that laptop to latest greatest and search for known issues...if xp won't work try win2k

by thechas

As Sgt_Shultz noted, perhaps the easiest work-around would be to remove the hard drive from the laptop.

Use a notebook to desktop drive adapter and mount the drive as a slave drive on a desktop PC.

Create a folder on the drive such as WinXP, and copy your XP CD to the hard drive.

That said, you CANNOT install XP from a DOS startup.
You need to either system the hard drive as a XP bootable volume, or download the correct XP startup floppy creation program from Microsoft and boot from the floppy.

You can also try an XP boot floppy from www.bootdisk.com

Chas

by wlbowers

You can create a set of floppy disk that will boot,provide you with cdrom drivers, and let you install XP. You will find the Knowledge Base article 310994 here, as well as the link to the program to create the disk:

http://tinyurl.com/176d

There are 6 disk in the boot set.

You can find a set of generic cdrom drivers here:

http://www.msttn.com/goodies/

It will install generic dos drivers on the hard drive. Unzip the files and copy them to a floppy.

This should allow you to get the cd going.

Lee

This discussion is closed to new replies.