Question Locked

Veritas Backup requires Second Tape

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are useing Veritas Backup 10 for Backing up the regular data. We are using Hp DLt tape c5141f. i.e. 80 gb. but after 49 Gb it asks for second tape & after putting second tape backup fails, what m,ay be the issue. Any solution is appreciated..

5 replies

by balthor

Some suggestions:1)Backup only the files that are the imperatives.Could you,on a daily basis,put your work files in a folder,then at the end of the day copy that time and dated work folder to a CD.Imagine a worst case.The drive has to be erased and you have to get your business going again.What are the files that you need to do so.With the full drive back up even the Windows operating system files are recorded.Even now if you had a failure how would you do a restore from the tape to the erased drive?To restore,I suspect that Windows would be re-installed using the exact same partition size as the backup,then install your backup software and restore.2)You might try a smaller partition size.This requires that you erase the drive and re-install Windows on a smaller partition say 30Gb.3)Try erasing the tape or do the tape test.

by d.i.y.

OK, let's see. I haven't worked with NBU for a few years, but let's see what I remember.

One thing that comes to mind is the retention periods of the backups involved. If you have used the 80GB tape before, and it still has active images on it due to retention periods (do NOT be using Infinite retention!), you won't have full space available for further backups.

There may be a library/tape drive configuration issue within NBU that prevents you from switching tapes succesfully.

What errors are you getting for the backup failure? If you are getting timeouts, try adjusting the buffer sizes and numbers of buffers.

by bhushanvs15

One thing is that I am not trying full backup only some files.there is one more backup that we are taking in day time it is completing successfully even though data size is more than 75gb on single tape. But for night backup it is happening.Not able to understand. We are not getting any proper error.it s showing unknown error.

by d.i.y.

Oh, yes, the "unknown error". I remember those! I get the feeling that there is something going on with the scheduling or the types of backups being done. I would look for soemthing in the night backup images that could conflict with the day backups. Different retention periods, or Full vs. the differential backup, or something along those lines. I remember that NBU didn't like having two different kinds of images on a single tape, but I can't for the life of me remember what the difference was.

This discussion is closed to new replies.