Try adjusting the monitor's refresh rate up one notch. Here's how:
1. Right click on an empty spot on your Desktop and select Properties.
2. Click on the Settings tab and then the Advanced button.
3. Click on the Monitor tab and select the next highest refresh rate in the drop-down.
4. Click Apply, OK and OK again.
Being an LCD monitor, if there's a minute fracture in the control array, you could find that one of the transistor control lines has failed. Basically, you've got a grid of transistors, with wires connecting them, behind the monitor. Specialized control systems and timing keeps them working, but basically, it's a load of wires turning on and off. If one of those wires gets damaged (From you saying that blue is on permanently, it could be a short on the red and/or green pixel line) then you get the symptoms you have.
- [If this was a stand-alone monitor, You could try the monitor on another system and test the connection, if the cable is not captive, by trying another cable. If you haven't got another PC or cable, try it on a different monitor output (If you've got another one).] -
Screens do go bad and replacement is much more feasible than trying to repair in this case.
[edited after it was pointed out this is a laptop] doh!