10 replies
by mamamacho Accepted solution
by mamies Accepted solution
by mamamacho Accepted solution
Cloning only to overhead LCD. (with VGA connection) Monitor is the monitor that computer us using for output. HP d530 tower with DVI and VGA output. Dell 17" plug and play monitor VGA connection.
Have everything plugged into VGA outlets. I have tried both a Y splitter and a box with provision for 2 VGA's to plug into. Both do the same thing.
by dr dij Accepted solution
an electrical problem. The two increase the total draw of current. Some computers can't handle that. Also turning off / on parts of the circuit then affect the other device.
I had this problem with a VGA card: one particular older large (cheap brand) monitor drew too much current for that card. If I tried to boot with it attached would not. Monitor worked fine on other computer. Computer worked fine with with other monitors or cards.
You can try another video card.
also you can try using the projector out to the LCD instead of VGA splitter.
by mamamacho Accepted solution
by dr dij Accepted solution
It isn't so much that it is a 'good' card but that the splitter changes the electrical properties. It would be similar to you adding extra speakers to a stereo. you could but it changes the impedance and eventually will blow out the amp.
I don't know what exactly it does to the vga signal but both devices draw current from the source computer to process the vga they get. And I think you said the sink device shuts off?
You could try a different brand LCD in case the power params are still in spec after the splitter. Or another of the same brand (less likely but mfg differences that would still be in spec for one monitor might make it not work with two) or a different brand of the splitter.
Is this one of the Matrox / Metheus (makers of cad vga cards)? or a really cheap one?
Like I said, 100% sure is electrical prob and you probably don't want to whip out a scope or current meter, which might not be able to check it anyway so you'll just have to swap gear or try new. Try the splitter mfgr's web site or support site.
Something simple like a ferrite bead or if there is such a thing as a vga amplifier to compensate might dampen surge that turns of the LCD for example. That's probably the best I can do without being there.
And you might get by this simply by turning OFF the LCD before it shuts off, then turn off the projector then turn it back on, so it won't get the surge. If that was all you needed to do now, then forgive me, but it sounds pretty minor hassle but you can't always fix stuff.
And might try new HDMI connectors if the projector has digital output. Or if the LCD has one. I have an ATI card that has both outputs. Or try dual cards. or one card with two vga outputs to bypass the splitter totally.
by mamamacho Accepted solution
by dr dij Accepted solution
I guess I had it reversed. Did you try with monitor off, turn on projector then turn on computer LCD? LIke I said, try dift things and other monitors
And go visit Descanso Gardens for me (when is not so hot! :)
We love to go visit there in the spring. It's a bit of a drive for us down in OC. You're right down the street. We joined and now get in Descanso, the LA Arb and Quail Gardens by San Diego free.
This site has some great pix of Descanso
http://www.earthpix.net/albums/botany/arb/descansogdns/20060409/fi/00000000.htm
by mamamacho Accepted solution
Beautiful pics!! I do like Descanso.
Just to clarify. I have no problem getting an image in both places. It's just when I turn OFF the projector when I am through, the monitor on desktop disconnects as well. Then I have to disconnect overhead vga from the splitter.(and monitor returns) Next time I want to show, I turn on projector, then plug in vga to splitter and presto, both on again. I am just trying to find a solution for the teacher in that room. Is there some kind of switch she can just turn on and off that will disconnect the overhead from the computer?
by dr dij Accepted solution
unless there's a VGA amplifier (is there such a thing?) that can stick on the one of the outputs to the splitter.
If you try turning off the monitor first before projector off then turn monitor on afterwords does it work?
If it does then this avoids a surge, if not then turning off the projector grounds or fails to ground or does something to the signal that can't be avoided without changing your configuration.
This discussion is closed to new replies.
Trending Laptops Forum posts
Sort by Trending