8 replies
by jgale
by bmixon
by bburns
I had a similar situation with my Linksys router (same one) and a different Cisco client(Dell laptop too!). The issue was that the bios version of the router was not yet compatable with IPSEC used to authenticate between the client PC and the home firewall. In my case, the firewall was a Cisco 2620 with firewall features. Linksys has updated their bios for your cable router. Make sure that you have updated it to the latest. In addition to the linksys bios issue I've found that the SMC cable router had the same problem until the bios was updated. So the issue is not exclusive to Linksys. I beleive the issue might be related to when a standard was setled on for IPSEC.
Regards,
Brian Burns
by bmixon
by mlynch
I have a BEFSR41 and I VPN to a FireboxII firewall at work. Make sure that you have the PPTP & IpSec features enabled on the Linksys router. I've not had any trouble getting it to work on my system.
Sincerely,
Mark Lynch
by lpanagoulias
by bmixon
by jdoughtry
This discussion is closed to new replies.
Trending Security posts
Sort by Trending