I am using 3 Linksys Rv042 VPN routers.
I am attempting to load balance two isp (sat. & ADSL) connections to send data to the same destination lan 192.168.1.0
When I set up the tunnels the rv doesn’t like this arrangement. It won’t allow two tunnels to the same destination. What are my options?
> Site A has the dual isp connections to a single rv042 on 192.168.2.xxx mask 255.255.255.0
> Site B is to our private network at our central office which is 192.168.1.xxx mask 255.255.255.0
> Site C is also on our private network (via microwave) but at a satellite office. Again, on the same 192.168.1.xxx mask 255.255.255.0 THis location has a PLC that is set to communicate data to the 2.0 subnet which is why I am in a fix. I can’t set an alternate route in the PLC, am stuck w. 2.0 to 1.0 subnets
Is it possible to get these two tunnels to co-exist?