Discussion Locked

W98 not releasing DHCP address.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have multi site WAN that users travel to and from... I have the users that travel from one site to another setup with DHCP. We are having a problem with the users who leave a site at say 1:00 PM and arrive at another site the same day at say 2:40PM and try to get on using DHCP, they cannot use the internet / e-mail because the IP is binded to the other site I have to go into winipcfg / release / renew and everything is ok.

Anyone know who this works?

Force the machine to release its current address when shutting down -- then it might be more likely to take a new one. I think there's a
registry setting for this, but I've never seen a post detailing it.

Any help would be great.

Toby

5 replies

by saihib

Add the following registry items to cause Windows 98 to automatically release all DHCP lease information at shutdown:
Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\DHCP
Value name: ReleaseLeaseOnShutdown
Type: DWORD
Value data: 0x00000001 (1)

Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Shutdown
Value name: FastReboot
Type: STRING
Value data: 0

by jpeezus

Windows 98 is a headcche in itself. you spend some much time on help desk with those machines when it is so much easier to upgrade!

This discussion is closed to new replies.