5 replies
by ewgny
download and run nbtscan
http://tinyurl.com/te7l
example
nbtscan 10.1.1.1-254
would scan 10.1.1.1 through 10.1.1.254 and give you a one liner that would show you the computername and the user logged on. This works as long as you haven't disabled netbios over TCP/IP on the workstations
by joseph moore
Another way to tell is to run the NBTSTAT command from the command prompt. Say you want to know who is logged into a machine at IP address 192.168.1.4
NBTSTAT -A 192.168.1.4 >filelog.txt
That would run the NBTSTAT command and write the results to a file called "filelog.txt"
Open this TXT file and it would look similar to the following:
NetBIOS Remote Machine Name Table
Name Type Status
---------------------------------------------
MACHINE1 <00> UNIQUE Registered
MACHINE1 <20> UNIQUE Registered
MYDOMAIN <00> GROUP Registered
MYDOMAIN <1C> GROUP Registered
MYDOMAIN <1B> UNIQUE Registered
MYDOMAIN <1E> GROUP Registered
MACHINE1 <03> UNIQUE Registered
USER_NAME <03> UNIQUE Registered
MYDOMAIN <1D> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
MYDOMAIN <01> UNIQUE Registered
by joseph moore
Ok, so the machine at 192.168.1.4 has a machinename of MACHINE1. The Windows domain it is in in MYDOMAIN.
Now, near the end, the <03> Unique record that is NOT a machine name record? It has USER_NAME in the first field? That is the logged on user name. So, if user BOB were logged in, there would be a <03> Unique record with BOB listed.
That is how you can tell who is logged into a remote machine.
by loketar
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending