Discussion Locked

win 95/98 defrag

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Defrag restarts itself at about 6% in a loop.
Could there be some programs running at the background?
I checked the startup folder, there is nothing inside.

9 replies

by billharr

I've also got a Defrag problem on 1 system in a 22 system shop. On all machines I have a shortcut on the Start Menu that auto runs both Scandisk & Defrag (I set this up because most machines are turned off at the EOD & are in constant use during, soScheduling a Task during on hrs is not what I want. Users clk & leave for lunch or out-of-office work to use it). 1 machine returns an error msg. that suggests running Scandisk to fix errors using Win Help. I've ran both the /Surface & /Thorough options from DOS & Win but Defrag still stops. I've tried from Safe Mode but Defrag fails there with the same error msg. (running Defrag from Safe mode is a suggestion from the MS KnowledgeBase so you might want to try it.

I've seen Defrag fail before but using the Close Program (Ctrl+Alt+Del) to shut down everything but Explorer & Systray & then shutting down any 3rd party Screen Savers or Open GL ones usually fix it & running from Safe Mode has always worked except for this 1 system. I'd also Run MSConfig and look at all of the stuff enabled on the Start tab page -- some of it can be disabled more permanently. One other thing: I discussed this with a 911 support tech. & he says there are some processes that run in W98 that don't show up in the Close Prog. list so that's why Safe Mode will sometimes work when shutting down most apps in normal sometimes doesn't.

I'm still looking for a fix for my problem!

by clover252525

Yes, there can be many things running besides what is shown in the start menu. Press CTR/ALT/DEL and close everything except Rundll and Explorer, then run Defrag.

Clover

by mzy

There could be a problem with the disk that you want to defragment. Windows scandisk sometimes cannot detect some errors, so what i suggest is to let you restart in ms-dos mode and run scandisk. It will scan more thoroughly than windows scandisk does. Hope this helps, maozy.

by avachon

Hi, make sure your virus scan is set to disabled during scandisk and defragmentation. Virus programs often interfere and force the machine into a loop. After your maintenance, reenable your virus protection. Hope this helps.

This discussion is closed to new replies.