Discussion Locked

Win 98 CDRW/ sound problem after replace

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I replaced a CD-Rom with a CDRW in a Win 98 system and also replaced the sound card with Sound Blaster Audigy and now both CDRW are recognized by the system and read disks, but I am not able to get the sound to work. I also disabled the onboard sound card on an Intel SE440BX-2 Motherboard in the Bios as suggested by the Intel website. and I removed the software for the onboard sound card. Any help would be greatly appreciated

2 replies

by sgt_shultz

how does the new sound card look in Device Manager? If it looks good in Device Manager, check this stuff:
1) sound cable hooked to new CDRW (so you can play music CD's)
2) volume not muted or off
3) do headphones work?
4) is analog/digital speaker setting correct?

by lumberjack

is the small 2 core cable between CDRW and sound card connected? small but not insignificant!

This discussion is closed to new replies.