Discussion Locked

Win-98 Device Manager

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When in a safe mode in Win-98, under ControlPanel/System/Device Manager/HD controller, I got 5 lines of each :
- primary IDE controller
- secondary IDE controller.
Want to get rid of them.System doesn't allow
us to do that.

15 replies

by todd

You must remove the bus master IDE controller, and it will remove all the hard drives. On next reboot, the drives will be redetected.

by jokeman

the 1st answer to your question is correct.. any duplicates in safe mode are not good for your system... removing the ide controllers bus masters wil not remove your hard drive... win98 will just re-create them!!

by dean_magnusson

I assume you are the system administrator to do this, otherwise you can't.

In device manager, highlight the multiple entries one by one, and click remove. If the prompt asks for reboot, say no until you are done, then reboot. (make sure all are removed.) Then reboot.

Windows then will reasign the proper IRQ's and hopefully this remedies your malady.

by hidayat

You can go using regedit, not Device Manger!

Delete keys under

[HKEY_LOCAL_MACHINE\Enum\MF]

Make sure to export the key before deleted, Just In case....

Windows will recreate it on reboot.

Thanks.

by max_in_oh

Safe mode limits your abilities in DEVICE MANAGER. If you are having startup problems and can't boot clean into Windows, you have to clean up the startup before messing with the drive configurations. Once in safe mode, START/RUN WINCFG.exe. Turn off all of the startup programs, check your config.sys and autoexec.bat to be sure you NEED all the items listed.
Once you reboot in clean, remove all of the drives listed in DEVICE MANAGER including busmaster drivers. When you reboot, you should have a fresh clean load for your drives.
Go back to the wincfg and turn on your startup items one at a time. Reboot for each item you turn on to be sure you still boot clean.

by Member 23815185

You should be able to delete all 10 entries - don't leave any. Click on each entry, and select "Remove". When you restart the computer, it should detect new hardware and reinstall the correct driver. You may need to insert the Win98 CD or a diskette if requested.

This discussion is closed to new replies.