Discussion Locked

Win ME and Client For Microsoft

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 9 brand new dell machines with windows me on it. I then installed a nic card. Then proceeded to go to the network poperties and added tcp/ip and client for microsoft. I then went to the logon selection box and chose client for microsoft network. When i reboot i don't get a client for microsoft logon prompt but instead i get the windows logon box. So then to check out the ethernet card i tried to ping the file server and i got a a reponse. Then i went to ipconfig and it got the infofrom the dhcp server. So i know the card works. But for the heck of it i threw in two other nic cards and on diffrent pci slots. Every card did the same thing(no logon prompt) I went to the registry to see if the autologon key was present and it wasn't there so that wasn't the problem. PLease keep in mind that i have networked probably a thousand 95 98, 98 se, and 2000 machines. The only protocol im running is tcp/ip. Keep in mind every machine does the same thing.

11 replies

by rockyolson

Hi I just ran me through a router adn did much the same. I made sure that tcp/ip was bound to network card in network, ran winipcfg used the drop down menu to find my card clicked it hit renew and then ok rebooted and all was set. So I know everthigs works ok there, don't know what else could be hope to watch here to find out anything...good luck rockyolson@charter.net

by baziite

First logon to windows with your password then Logoff You'll See the microsoft Networking Logon Prompt . If this doesn't work then remove client for microsoft networking and reinstall it and follow the above logon/logoff excersize .

Much Luck !!!!

by rick

I have already tried this. The solution is more difficult than that. I have tried to reinstall all protocols and clients. I have tried to logoff and see if the "microsoft logon" came on but it doesn't.

by baziite

Did the Dell computers come with the OEM version winME CD . Are you using this CD or are you using a different one . I've had a similar problem before and the client for microsoft networking just refused to install properly . Secondly Try installingthe "Microsoft Loopback adapter" adapter and see if that gets you to the Network Prompt .If it does then it is definitely the NIC thats causing the problem .

by rick

I tried that and the logon prompt still didn't work but thank you. Yes it did come with the oem version of me. When i installed windows 98se on the same exact machine with the same nic card...it came up with the logon prompt so i know the nic cardis working.

by baziite

Actually I have no experience with Windows ME , But Tell me if I am getting you wrong . You say that after logging in with windows password , you can ping the file server , you get the reply from the DHCP and basically you are on the network withoutactually logging on to it . May be in Windows ME Microsoft has done away with having logon to the network, since the operating system is officially a Network operating system Like Windows NT . You dont get a seperate network logon prompt in windows NT . whether you are on the network or not is decided by the type of account Local or Global . Check if you can setup Local / Global accounts in windows ME !

I am just sharing thoughts with you !!!!
Good Luck !!!!

by rick

I appreciate you spending time on the question but, windows me won't let me authenticate with the server. I can just ping it. I can use the dsl that is going through the lan. And the server is set up for the computers so it is not the server. If i had the network logon the server would authenticate the workstation. I will be glad to here any other suggestions

by hsbjr

Have you seen the following MS KB article?
Q141858 - No Windows or Network Logon Dialog Box at Startup Excerpt from this page:When you start Windows, you may not receive a Windows or a Network Logon dialog box, or you may receive one of the following error messages:(size 10936 bytes, updated 9/29/2000 11:49:00 PM GMT)

Good Luck,
Harold

by rick

Yes actually that was the first thing i did was look for the autologon key in the regestry. BUt thank you for your response

This discussion is closed to new replies.