Question Locked

Win XP Pro OEM and motherboard change

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have a system I built that the motherboard is going (various issues). The manufacturer will take 2-4 weeks to repair and return, my client can't be without PC that long. Motherboard is no longer in production so manufacturer can't do an advance replacement.

To keep my client happy I told them I would install a different motherboard temporarily and then reinstall their motherboard when it comes back from the manufacturer (they requested this motherboard specifically when they ordered this custom built machine).

Since the windows is an OEM will it require a reactivation for the temporary board and then again when the original motherboard comes in?

6 replies

by rob miners

of time that you take. If you install to the temporary board you will have to reactivate which can be achieved over the internet. If you reinstall within 120 days you will have to contact M$ by phone for the activation.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

by lmoh

I know Windows can be finicky, especially when the mainboard of a machine is replaced. I'll let you know how it goes.

by thechas

As stated, Windows will require activation after changing the motherboard.

I have a concern that Windows will become VERY confused when you change back to the original motherboard.

Start by making a full backup image of the hard drive. Make sure when the system comes back for the second motherboard swap that you backup all new or changed files since you made returned the system to the client.

If possible, just before shutting down the system to change motherboards open device manager and remove all of the mainboard hardware.

On the first boot with the new motherboard, press F8 and boot into SAFE MODE.

That way, Windows has the best chance of finding drivers and not requiring a full reinstall.

Once Safe Mode finishes booting and installing drivers, reboot into normal and you "should" be good to go.

Follow the same process when you get the repaired motherboard back.

Of course, if anything goes wrong, you can restore from your backup.

Chas

by larry2148

You can just call MS and tell them it won't activate after making a hardware swap, they'll ask you how many computers you installed this copy on... you say one and they'll give you the activation code, I do it all the time with machines that have been activated "too many times" by reinstalling, same with office.

This discussion is closed to new replies.