Discussion Locked

Win2000 setup crashes at device search

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win98SE machine which I'm trying to upgrade to Win200 Pro. I'm
running an AMD processor at 700Mhz, ATI Rage128 video card, Linksys LNEPCI
II card, SBLive sound card, with 384Mb RAM and 40Gb harddrive. After the
first reboot, during the search of devices, the progress indicator travels
about halfway and then the screen goes black with several rows of backwards
commas which fills the entire screen. The cursor is blinking in the upper
left-hand corner of the screen. There is no harddrive activity nor any
indication that any background activity is occurring... I cannot use
CTL-ALT-DEL to restart the machine. After restarting the machine, by
powering down, the win2000 setup continues but crashes at the exact same
place each time. I've pulled all unnecessary cards and hardware and retried
setup to no avail. I've found no resolution on the web for this problem so
I'm looking to any of you that may be able to help.

Thanks in advance.

Gina

6 replies

by maxwell edison

I've seen this about a dozen times over the past year - and I had to replace about a dozen graphics cards.

Take out the rage 128 AGP graphics card (the same card I had trouble with) and replace it with something different.

If you look at the chip on the card, I'd guess that you'll notice a number 66503 or 66501. The 66503 will simply not work. The 66501 may work after Windows installs completely, but may be buggy.

by cwjudd

Maxwell is completely correct. I had the same problem and I have learned over the past year that the biggest problem with 2000 is video drivers. I have been able to successfully configure the video card once windows has been installed, however I would highly suggest that you purchase a different card and install it after you have installed 2000. 2000's biggest nemisis is video cards and drivers. Remove the card and / or purchase a different card and then you should see setup complete.

This discussion is closed to new replies.