Discussion Locked

Win2k and ME dual boot snafu...

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I had a functioning win2k os running. I booted from an ME CD and installed ME to a different directory. I thought I would get the boot menu offering me 2 different OS options. Now it boots straight into WinME and after looking for a boot.ini file(NT), I realize there isn't one in 2k or ME. How do I fix this, so i can dual boot or switch back to win2k. HELP! Thanks..

13 replies

by grondin_e

from what you just said... Your problem is that you installed the junior OS last.. what you need to do to correct the problem is uninstall everything. basically a clean slate. then install winME and then 2k pro. from there you should have no problems at all using the duel boot manager.. Word of advise however I have never, from the day of concept to now, heard anything good about WinMe, so using it over 98 is your option however my recomedation is using 2k with 98 still installing the junior os first.

by dmiles

First you want to use your ERD to reinstall the BOOT.INI files from the disk,insert disk into the floppy and boot the computer,when finished,eject and reboot the computer,this should give you the boot manager to select the OS,if this works,boot intoWIN2K and click on Start>Programs>Administrative Tools,right-click Computer Management and select properties,click the Advanced tab,click on the Startup and Recovery button,this screen will allow you to modify how OS boots.

by tony.colgrove

Dont follow the first answer. You dont have to start all over. Dont follow the second answer because you cant get to Win2k.
Boot from the Win2k CD. Do a R for repair then a C (i think) for the recovery console. You will need the local admin password to log into the Win2K installation.
Once you have logged into the Recovery Console do a fixmbr to repair the Master Boot Record and set it back to a look for the nt boot strap.
All is not lost.

by corey

i tried the fixmbr command but it warned me that i could leave all of my partitions unusable....didn't want to go there....

by neje

First thing you need to do whenever you want to install an OS other than Win2k. Install the OS with the lowest version 1st then the higher version next etc. Just like when a PC makes a master browser request for a synonym

by umbral-echo

Answer 3 is definitely the right one, but you might be luckier still. Regardless of whether you have created an emergency repair disk the operating system should have done this during setup and stored the information in the winnt\repair folder. To recover, do the following:

1. Boot from the Win2K Pro CD-Rom.
2. Choose "R" to repair.
3. Choose "R" to do the Emergency repair process.
4. Choose "M" for manual repair.
5. You should see three options in a menu. Highlight the middle one VERIFYWINDOWS 2000 SYSTEM FILES and hit the Enter key to deselect it. Only the INSPECT BOOT SECTOR (will put your NT boot sector back) and INSPECT STARTUP ENVIRONMENT (will put back ntldr, boot.ini, and ntdetect.com) should be selected. Then highlight CONTINUE and hit Enter to proceed.
6. Choose "L" to search for the Windows 2000 installation on the drive. Accept the one it finds and start the repair process.

This will restore Windows 2000 to working condition. Millenium is probably a write off however. Remember that you can change the drive letter your computer boots from in the BIOS. If you set it boot from D: and install Windows ME normally you will have two boot sectors that you can switch between. That might be the answer for your current situation. You wont need to reinstall 2000.

by corey

this was the answer. the only reason i needed the 2nd, inferior OS, was so my son's games still worked. I formatted reloaded win2k and then found out that 3/4 of his games didn't work. I will load up a second pc w/ win98 or ME instead of trying to make mine a dual booter. I don't want to wipe and reload 2 os's. Thank you for the answer!!!!

by jrubinstein

Answers 3 and 5 are good, but you almost certainly do have a boot.ini file. I would expect that you have the system files hidden, go to folder options and show hidden system files.

The one question remaining is whether your system will still find the ntldr file to boot up with. If not follow the above answers

by corey

I tried #5 first. You were right, i had to uncheck the hide system files and sure enough....they were there

This discussion is closed to new replies.