Discussion Locked

Win2k and PCAnywhere File Transfer Prob

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are running W2k Server with PCAw host running as a service. The host session runs fine until we pull up a File Transfer window. Response on the host then stops for a minute or so, then the file transfer window appears and when we start the transfer it completes at normal speed without problems. I have been to the Symantec KB and tried all the solutions there without success. The video card in the box is an ATI Rage series, but Symantec swears that should not affect things.
We need to get this system responding as it should.

10 replies

by phil.hall

Is IIS installed on that server? If so, and if you don't need it, uninstall IIS and see if that makes a difference.

by phil.hall

Ok, try this:

Open PCAnywhere, select Tools from the top menu, from there slect OPTIONS. Scroll to the right until you find the tab named FILE TRANSFER, select that tab. Uncheck the "Pause remote control to maximize file transfer performance" box.

by jrrich

Tried that-- no joy. We went ahead and remotely uninstalled the app, cleared the debris, restarted the server and reinstalled. After reinstalling, the file transfer windows invoked once at speed, then hung again. I'm frankly baffled. I think PCAw is hanging as it calls a windows system dll, but I don't know enough about it to take it any further.

by phil.hall

Put the Windows 2000 CD back in the CDROM drive, from START > RUN enter "SFC /SCANNOW" let it replace any missing DLL files and the like. Reboot and try again.

by don.burnside

What version of PCAW?

I use PCany (host version 9.5, remote v10.0) file transfers daily to backup remote sites via modem. Keep in mind that when initiating a file transfer, it must be started both at the host and the remote, and if over dial-up this can be a long process. Connecting via TCP/IP helps it speed up a bit, but there is still a lag.

by jrrich

Yes, uninstalled, removed reg keys manually and reinstalled. Worked at speed once only, then reverted to 3 1/2 minutes+ to pull up dialog

This discussion is closed to new replies.