Discussion Locked

Win2k install won't play nice!!

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 11.5 gig hard drive [ide] with win98
on drives c: d: e:, f: is to be the win2000
install. I go through the install up to the
point of formatting f: then get the message
that it can't be formatted, after the format
is done?
Win98 works well with no problems what gives?
Am I selecting the incorrect option after my
hard drive is analyzed? The options on which
one to format are rather perplexing. I
selected the drive that matched the capacity
of f:
The nt loader is visible through win98 and
drive f: is present but inaccessible.
c: 2.46
d: 5.84
e: 1.36
f: 1.74
These numbers don't match the ones after the
hard drive is analyzed in win2000 setup. Cmos
is set to boot from the cdrom and no antivirus.

Andy

7 replies

by avand1

Thanx to JerryM MCSE+I /A+ for original
assistance. This is new dilemma. Nuts!

by msgtray

This may be a silly question, but what type of partitions are d,e, and f? Remember that you are limited to 4 primary partitions per hard drive no matter how big it is.

Just a thought... Ray

by avand1

I have fat32 partitions on all drives. Will an old bios be the culprit (1995)?

by wjwncpro_techrepublic

Let me through this out their, Did you try installing from Win98, or did you boot from the CD. Try rebooting with the install Win2k CD in the drive and the 2k boot disk in "A" and not to Win98. Win2k will not install from Win98.

This discussion is closed to new replies.