5 replies
Microsoft article Q288180 discussed a shitdown problem, but it indicates the computer simply hangs up. The recomended fix is to install the latest service pack. But your "reboot" problem wasn't described in the article. (I'd still install the latestservice pack.)
In addition, I've also seen where the Diamond SUP2260 PCI modem or an Accton Cheetah 10/100 NIC causes a reboot instead of a shut down. Their support site states, "This is a known issue with these cards. The card generates an unknown PME (Power Management Event). There is no solution at this time."
I'd take that SCSI card out and test the system again. If it behaves properly then you know it's the card. And, based on the other devices I mentioned that causes that same problem, I would surmise that the Adaptec 2940 SCSI card has the same problem. If that is indeed the case, the retailer should either provide a software fix for the problem or replace the card with a more compatible one.
Good luck,
Maxwell
.
.
Please excuse the "typo" in the first line of my answer. That word should, of course, be "shutdown". I should proof read before I submit.
Maxwell
by shanghai sam
by stoobydo
This behavior can occur because Adaptec Easy CD Creator version 4.0 does not deal with shutdown and hibernation issues in Windows 2000.
To resolve this behavior, upgrade to Adaptec Easy CD Creator version 4.02.
To get more about Adaptec EasyCD Creator compatibility with Windows products, go to -
http://www.roxio.com/en/support/cdrwin/cdrecos.html;$sessionid$HJ15ULIAAMPIXJ4YZOUCM4Q
by tjbennett
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending