7 replies
by thechas
First, NEVER hot plug or unplug a PS/2 keyboard or mouse. You are at a very high risk of damaging either the device or the PS/2 port on the PC.
I suspect that the problem is that your sons monitor does not support the default video mode on the Compaqs.
That however does not explain no video at POST.
Try connection a video extension cable to your sons monitor (unless the monitor is one where you can change the cable).
There may just be a dirty or pushed in pin on the monitor cable.
Chas
by randy
by fred07
Hi, and you tell me?? I have had monitors work great on their own machine and then dump yet work on any other machine. I simply no longer trust the monitor for resale and use it for test bench.
I would check with local pc repair and get a different monitor that works with the machine [s] and keep going. Used monitors are cheep if you look for them.
What you are describing is a "pluged in too many times conectivity problem" of wear.
by randy
by seandurcan
I think Answer 1 has a point! Compatibility between the video card and the monitor can be an issue. It's not simply a matter of both being from the same manufacturer.
Also check the BIOS and see that Video is on PCI as opposed to all other settings.
by randy
by randy
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending