Discussion Locked

Windows 2000 Advanced Server AD

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

My question is I am running Active Directory on my server and everytime I attempt to connect to it to join the domain,it says (After it asks for my user name and password) "The following error has occured when trying to join the domain "Primary" The network patch cannot be found"

How do I fix this? I see everything in the Network Neighborhood, I see the Domain and the PC. The Server is setup as a Domain Controller using Active Directory.

Please help.
Thanks

8 replies

by aaron_wurthmann

Are clients using an AD server for DNS resolution or at least a server that has the AD zone info propagated? If these are Windows NT 4 clients they are going to need WINS info as well and so will the DC.

by michael34

Thanks for the help guys, but my boss decited to stay with NT 4 for the time being. Thanks anyways though, I really appriciate it.

by atharaaa

Hi,
It'll be helpfull if you can let everyone know the answers of below questions because this will guide us to reach the root of the problem.
1) AD DC you are running is in MIXED MODE or in NATIVE MODE. ( Because the DC will not allow any machines to be added to the domain if DC is working in NATIVE MODE. And if its in MIXED MODE it allows all OS pc's to be members of domain )
To check your DC is running in which mode go
open AD users and computers > right click on the domain name and click properties.

2) If your domain is in Mixed mode and you are willing to join Pre-windows machines
( WINNT/WIN95/WINME/WIN98 ) you should run WINS service on DC.

3) Check physical connectivity between your workstation and DC. ( i.e. are able to ping DC )

4) Are you assigning static IP to cliet PC or Making DHCP client. If you are using DHCP then you cannot ping DC before joining the PC to Domain.

Check the above mentioned things and give feedback. May be this can help you.

by michael34

Thanks for the help guys, but my boss decited to stay with NT 4 for the time being. Thanks anyways though, I really appriciate it.

by timwalsh

Okay, couple of things:
1. Computers running WinNT (Server or Workstation), Win2K (Server or Pro), and WinXP must be joined to the domain before a user can logon to the domain.
2. If the computer to be joined is running either Win2K (Pro or Server) or WinXP Pro, you must specify the AD domain name (yourdomain.com) instead of the NetBIOS domain name (YOURDOMAIN) when joining a domain.
3. If the computer to be joined is running WinNT Server or Workstation, you must specify the NetBIOS domain name when joining a domain.
4. Where is your DNS being hosted? For AD to work properly, you must either host DNS locally, or have access to a DNS server that accepts dynamic updates (which precludes using almost all ISP hosted DNS servers). If your are currently using your ISP for your primary DNS, you must essentially start again from scratch (install DNS locally, recreate your AD domain). If you are hosting DNS locally, all clients must be pointing to this local DNS server.
5. In a Win2K domain, WINS is pretty much required for efficient connectivity of ALL clients prior to Win2K.
6. Native mode/Mixed mode only refers to situations where WinNT BDCs might still exist as part of the domain. It has absolutely nothing to do with which clients can join the domain.
7. Being joined to the domain (or not) has nothing to do with whether a given computer can ping the DC. As long as a computers IP address (either fixed or assigned through DHCP) is in the same IP subnet as all other computers in a network, barring connectivity problems, it will be able to ping any of the other computers (although it may not be able to ping by name if not pointing to the correct DNS server).

Hope this helps.

by michael34

Thanks for the help guys, but my boss decited to stay with NT 4 for the time being. Thanks anyways though, I really appriciate it.

by michael34

Its kind of hard to explain, but here is what I am attempting to do:

I have a LAN right now, which has 1 4 Port Router (use to connect to the internet) and a 4 Port switch. The Router assigns the IP Addresses to the computers on the LAN.

I hadWindows NT Server 4 setup, but everyone told me it was junk and to upgrade, so I did and come to find out, AD is more of a pain. All I want to do is setup a Domain like I had with Server 4, where everyone can join it.

This discussion is closed to new replies.